LSI 9260-8i SATA3 SAS 6Gb/s PCIe 2.0 RAID Card Unboxing & First Look Linus Tech Tips


www.ncix.com This is a very high performance, high bandwidth RAID card that I'll be using to do some testing with the OCZ Onyx SSD drive. It supports all the latest features, and I even have a battery back up that I'll be talking about a little bit in case you ever wondered what a battery back up does on a RAID controller.


LSI 9260-8i SATA3 SAS 6Gb/s pcie 2.0 RAID Card Unboxing Linus Tech Tips

Cheness Cutlery 9260 Spring Steel Katanas


More info: www.sword-buyers-guide.com A compilation of standard and destructive tests of Cheness Cutleries 9260 Spring Steel Katana (specifically the Tenchi, Oniyuri and SGC)


Cheness Katana Sword Tests Cutting Destruction Spring Steel 9260 Buyers Guide

LSI 9260-8i FastPath SAS RAID Card & OCZ Onyx 8 SSD RAID Performance Testing Linus Tech Tips


Honestly I'm a little disappointed at how the Onyx performs on this controller, but these are still some pretty cool read/write speeds compared to a single drive setup. Remember that while TRIM doesn't work in RAID, garbage collection will, so as long as you leave the array idle sometimes, performance should not degrade.


LSI 9260-8i fastpath SAS RAID Card OCZ Onyx SSD Performance Testing Benchmark Review Linus Tech Tips

Spring steel katana - without Hi (9260 steel)


A nice quality sword made of the famous 9260 steel. You can find the sword over here www.samurai-sword-shop.com Cutting test of this sword can be viewed here www.youtube.com


martial arts katana samurai sword japanese iaido 9260 steel shop ikbenklein

9260 Samurai Sword Cutting Tree Branch


Full review: www.sword-buyers-guide.com Cheness Cutlery Samurai Sword Cutting a Tree Branch


samurai sword cutting Buyers Guide

4x Intel 510 120GB SSDs in RAID 0 on LSI 9260-8I Linus Tech Tips


www.ncix.com Finally hit the internal bottleneck of this impressive RAID card! And with only 4 drives.... The 510 is fast, yo.


4x Intel 510 120GB ssds in RAID on LSI 9260-8I Linus Tech Tips

Crysis Level Loading Time With 8x OCZ Onyx SSD RAID0 on LSI MegaRaid 9260-8i Linus Tech Tips


Someone asked me to upload this, so I did. I don't know if this is fast or slow, but it's on YouTube now. Immortalized in the intarwebz.


Crysis Level Loading Time LSI 9260-8i fastpath SAS RAID Card OCZ Onyx SSD Performance Testing Benchmark Review Linus Tech Tips

1.3GB/s Read Speed 8X OCZ Vertex 2 60GB SSD RAID 0 on LSI 9260-8i RAID Card Linus Tech Tips


I've been promising this for a while. Sorry it took so long...


1.3GB/s Read Speed 8X OCZ Vertex 60GB SSD RAID on LSI 9260-8i Card Linus Tech Tips

9260 steel katana with Hi


A nice quality sword made of the famous 9260 steel. You can find the sword over here www.samurai-sword-shop.com Cutting test of this sword can be viewed here www.youtube.com


samurai sword japanese katana martial arts ikbenklein

NRTS Novabus #9260


We are departing Woodgrove Centre on Route #1 heading towards Downtown on April 21, 2009 Nanaimo Regional Transit, Nanaimo BC


BC Transit Transit buses Novabus Nanaimo Regional Transit 9228

low budget samurai sword - 9260 steel


This is our latest addition in our shop, a 9260 steel cutter for just 250$ or 175 euro..


samurai sword japanese swords katana ikbenklein

Konron 9260


cutting tatami mat


konron katana serge 021974

Extruder for HIPS sheets by europack1@gmail.com contact 0091 93 2324 9260


EXTRUDER: Material (Screw / Barrel):EN 41B, Gas Nitrated, Hardness: 65 RC L/d ratio: 28:1 Screw speed - rpm:20 - 120 Max. Output125 & 90 KG/hr for HIPS, PP Screw Type:Barrier type with special mixing zone Barrel Cooling: Jacketed water cooling on feeding zone & Blower cooling on heating zones Hopper:50 Kg capacity with sight glass, emptying chute, shut off slide & lid Type of Barrel HeatersCeramic Band Heaters with digital temperature controllers SCREEN CHANGERS: Main ExtruderPiston Type SHEET DIE: Die type: "T" Die lip width: 680 mm Die Material: high-grade hot work alloy steel. Sheet width (after trimming) - mm: 600 Sheet thickness - mm: 0.2 - 1.5 No of heating zones: 3 Deckling locking, each side50 mm Flow surface: hardened, hard chrome plated and polished to mirror finish and completely flash chrome plated GearboxHelical with thrust bearing CALENDAR UNIT: No of Rolls3 (1 fixed & 2 moving) Chrome roller diameter (mm):250 Chrome roller face width (mm): 720 Line speed - meters/ min.:1 to 18 Roller cooling systems:water Flow ChannelsSpiral Roller Vertical MovementPneumatic Material of RollsEN 19, Hardened to 65 RC, hard chrome plated, ground & mirror super finished to less than 1 RA EUROPACK MACHINES WINDER: TypeConstant Torque with 2 Stations Pulling roller diameter (mm):100 MaterialOne Rubber & another Hard Chrome Plated Line speed - meters/ min.:0 to 10 Side Trimming Unit2 stainless steel blades with guide rollers. ClutchMechanical MOTORS: Main Extruder:40 HP AC <b>...</b>


extruder sheet extruder hips sheet extruder extrusion machine extrusion plant ps extruder ps sheet extruder ps film extruder thin sheet extruder thick sheet extruder europack

BNSF #9260, loud & lovely


Filmed 5/31/09


5/31/09 bnsfbeagrett 9647

NS 9260 East H-NTWGAL in La Crosse 1-7-10


The daily H-NTWGAL departs La Crosse, WI after working in the yard.


bnsf ns la crosse freight train DYP 1420

Konron 9260


cutting bottle on a wire


konron katana serge 021974

A Ride on SEPTA Train 9260


I was Riding on my usuall train from work when I notice I had my camera and the Train sounded kinda weird. I recorded from Chester to mid way to Crum Lynne


train budd silverliner IV SEPTA south eastern pennsylvania transportation authority R2 Chester Eddystone MSTS rongeez814 dat nigga Unique RON 814

BNSF 9260 & 8852 Lead a Coal Empty, Fairfield Iowa


BNSF Coal Empty With BURLY SD70ACe Leading YEAH!!!! Leader BNSF 9260 (SD70ACe) Leader BNSF 8852 SD70MAC)


MOV070 UP 5140 SD 70

konron 9260 katana tested too the bone


Konron 9260 katana, test, review


konron katana review test nederveen 1962

konron 9260 katana tested too the bone cam2


second movie konron test, tweede filmpje van de test


konron katana review test cam2 nederveen 1962