pn-Juction-And-Diodes
Check us out at www.tutorvista.com A pn junction is formed by joining p-type and n-type semiconductors together in very close contact. The term junction refers to the boundary interface where the two regions of the semiconductor meet. If they were constructed of two separate pieces this would introduce a grain boundary, so pn junctions are created in a single crystal of semiconductor by doping, for example by ion implantation, diffusion of dopants, or by epitaxy (growing a layer of crystal doped with one type of dopant on top of a layer of crystal doped with another type of dopant). PN junctions are elementary "building blocks" of almost all semiconductor electronic devices such as diodes, transistors, solar cells, LEDs, and integrated circuits; they are the active sites where the electronic action of the device takes place. For example, a common type of transistor, the bipolar junction transistor, consists of two pn junctions in series, in the form npn or pnp. The discovery of the pn junction is usually attributed to American physicist Russell Ohl of Bell Laboratories. Schottky junction is a special case of a pn junction, where metal serves the role of the n-type semiconductor. Diode is a two-terminal electronic component that conducts electric current in only one direction. The term usually refers to a semiconductor diode, the most common type today, which is a crystal of semiconductor connected to two electrical terminals. A vacuum tube diode (now little used) is a <b>...</b>
